CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

gambit meshing prob

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 8, 2008, 14:22
Default gambit meshing prob
  #1
paul
Guest
 
Posts: n/a
when i mesh a geometry in gambit it gives error : "logical cube not able to be found". what does it mean? how am i supposed to get around this prob? i want to mesh with hex and use map. plz help.
  Reply With Quote

Old   March 9, 2008, 07:35
Default Re: gambit meshing prob
  #2
Ahmad Falahatpisheh
Guest
 
Posts: n/a
Do you have any complicated surfaces? and what is your unit of drawing your geometry?
  Reply With Quote

Old   March 13, 2008, 09:22
Default Re: gambit meshing prob
  #3
paul
Guest
 
Posts: n/a
hey! sorry i couldnt reply earlier. i was out of town. actually the geometry i am using is not complicated at all. there are no curved surfaces. just straight edges. dim are in mm. hex takes lesser time to solve thus i want to use it. it does get meshed using tet. basically the geom is of rectangular fins(125*60mm) having 6 rectangular notches(15*15mm). i am unable to mesh the fins bcoz it gives the error. also for a smaller spacing (0.2) it gives error "not enough memory". why is that? bcoz i have a pretty good computer system (360 GB HDD, 8 GHz, 2 GB RAM, XEON processor).
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
1st prob: code 123 error | 2nd prob: max. packing Ferzola CFX 0 November 21, 2008 13:43
Gambit startup prob aarti FLUENT 3 September 20, 2008 07:41
need help on meshing in gambit renju FLUENT 0 June 25, 2008 10:25
need help on meshing in Gambit Mohsen khalafi FLUENT 6 June 23, 2008 07:09
meshing a fan using gambit tony FLUENT 1 February 15, 2008 01:28


All times are GMT -4. The time now is 05:11.