GAMBIT problem with 3D Boundary Layer when meshing
Hi all,
i got an error when meshing the domain volume. At the trailing edges of a boat keel with the ballast bulb the surface boundary layer on the foil and bulb surface don't go around the "trailing edge" edge and when meshing, GAMBIT gives an error : "Currently, 3D boundary layers are limited to flat face groups with the same boundary layer on all faces. A discontinuity has been found where one face has a boundary layer and the adjacent one does not. The problems occur in volume v_volume.6 along the following edges : v_edge.136, v_edge.148 and v_edge.133" I tried to add the trailing edge edge in the Boundary Layer but it doesn't help Any Idea? Thanks Anthony |
Re: GAMBIT problem with 3D Boundary Layer when mes
That error occurs when you don't have all the faces selected correctly. Also, it occurs when gambit can't find a logical start-finish point for the 3D boundary layer. Are you trying to wrap the boundary layer around the trailing edge?
|
Re: GAMBIT problem with 3D Boundary Layer when mes
Yes I'd like to wrap the BL around the trailing edge! do you know how to do that ? even with the "wedge corner shape" option in the BL menu, it does not work. Thanks
|
All times are GMT -4. The time now is 02:43. |