interior angle problem
Hi all,
i got the following Warning when trying to mesh (tetrahedral) a 3d volume : "interior angle of volume v_volume.1 for following edges is too large for side type boundary layer, which may generate poor elements" : v_edge.325 v_edge.325 is the trailing edge of a sailboat keel. The B.L. should go around the trailing edge but apparently doesn't. this warning is followed by an error : TG_mesh_Domain failed with error code 1. any idea (i can send an image if needed)? thanks Anthony |
All times are GMT -4. The time now is 06:31. |