CFD Online Logo CFD Online URL
Home > Forums > FLUENT

Ethane&air combustion

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   April 13, 2008, 17:48
Default Ethane&air combustion
Posts: n/a
I have a pipe. I put 02 and H20 vapor from the left and C2H6 from the top (nearly a the O2 inlet). The pipe is open on the right (at the end)

Pipe is long 1450mm, 50mm diameter

I would model this combustion between ethane and 02.I know "the mass flow in" of O2 and H2O at about 1100K. I know "the mass flow in" of ethane too. At the end of the pipe I know the pressure. These are my BCs.

I followed step by step a tutorial about methane-air combustion. I supposed my problem is very similar.

I use costant cp & density, energy equation and 0.6 relaxion factor for each chemical compound. The viscosity and mass transfer are the same of the tutorial. Initial condition: C2H6 less than O2, pressure 0, T= 1100K. Anway my problem not converge and I do not see my pressure rises up (it is about 1 atm uniform, like the pressure_outlet).

Durign the iteration like "temperature is set maximum 5e3" is written. What means?

Can I solve my problem? My principal target is defining the temperature How you can understand I'm a newbie about fluent.
  Reply With Quote

Old   April 21, 2008, 06:00
Default Re: Ethane&air combustion
Posts: n/a

The temp 5e3 means it is at 5000K.(Due to combustion the temp has increased)

In order to determine whether the combustion has occured or not check for the species. How do you create the combustion by patch or by initiating the temp(means by increaing the temp) Thanks Rupal
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
combustion model in premixed combustion chamber wuyu FLUENT 7 October 21, 2015 13:18
Hydrogen Air combustion in a combustion chamber popi CFX 7 July 11, 2007 18:40
Sawdust Combustion-Non-premixed Combustion Model Jessy FLUENT 1 June 19, 2007 10:59
combustion in internal combustion engine George Main CFD Forum 0 September 7, 2006 14:41
combustion prasat Main CFD Forum 1 June 16, 2003 13:17

All times are GMT -4. The time now is 22:35.