CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

HELP:evaporation in brick dryer

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 17, 2008, 06:06
Default HELP:evaporation in brick dryer
  #1
GAUSS
Guest
 
Posts: n/a
My problem consist on simulating evaporation rate using Fluent. the geometry is a 3-D brick in a dryer. I have to simulate heat transfer(done)and mass transfer/evaporation, but the brick is perforated (complex geometry).

I need solution as faster as possible.

Thank Y for your help.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Creating a grid for a channel inside a brick sanin FLUENT 0 November 6, 2008 08:03
How can I simulate a wheel inside a brick? Jordi Niubo FLUENT 1 February 12, 2007 09:34
Dilute fluidized bed dryer using DPM masood FLUENT 1 February 6, 2006 02:57
Modelling a Dryer Lucio CFX 3 April 19, 2004 21:58
how to create a brick using PIL sun Phoenics 1 April 24, 2002 11:18


All times are GMT -4. The time now is 18:40.