modelise the motion of the fluid by a moving wall

April 21, 2008, 06:55

hi all. i have a horizontal cylindre whith pressure inlet and pressure outlet in top and a water liquid is filled in the half of the cylinder, we create the motion of the fluid using a plunger defined by moving wall in the left of the cylinder. my problem is how to define the velocity of the moving wall (0.01m/s)by initialising on boundary conditions or defining custom field function or using UDF.

April 21, 2008, 07:06

http://www.mne.psu.edu/cimbala/

visit this page. might help you

April 21, 2008, 06:55	modelise the motion of the fluid by a moving wall	#1
samnetmoon Guest Posts: n/a	hi all. i have a horizontal cylindre whith pressure inlet and pressure outlet in top and a water liquid is filled in the half of the cylinder, we create the motion of the fluid using a plunger defined by moving wall in the left of the cylinder. my problem is how to define the velocity of the moving wall (0.01m/s)by initialising on boundary conditions or defining custom field function or using UDF.

April 21, 2008, 07:06	Re: modelise the motion of the fluid by a moving w	#2
Gaurav Mehra Guest Posts: n/a	http://www.mne.psu.edu/cimbala/ visit this page. might help you

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Motion diffusivity solver has problems with patches moving toward each other	bfa	OpenFOAM Running, Solving & CFD	2	July 8, 2009 21:35
UDF of tube moving with pendulum motion	Esther	FLUENT	0	July 7, 2008 04:33
How to set the harmonic motion of moving wall BC	kim	OpenFOAM Running, Solving & CFD	0	September 29, 2005 00:29
moving wall and fluid	svh	FLUENT	2	September 30, 2004 07:33
moving wall and fluid	soody	FLUENT	3	September 20, 2004 01:37