CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

post processing problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 29, 2008, 07:37
Default post processing problem
  #1
Charles
Guest
 
Posts: n/a
Dear all, I finish a run and need to do post prcessing work on a zone. for example, make a contour plot at section in the zone. The problem is that how can I get the velocity or gradient(dt/dx or dp/dx etc) in the local coordinate system. would you please give me a hand. Thanks a lot in advance! Charles
  Reply With Quote

Old   June 1, 2008, 12:39
Default Re: post processing problem
  #2
jesse
Guest
 
Posts: n/a
display/define iso/surface, line,etc
  Reply With Quote

Old   June 2, 2008, 04:12
Default Re: post processing problem
  #3
Charles
Guest
 
Posts: n/a
Thanks for your attention. but the command you mentioned just make a surface from a zone. when doing processing work, the result on the surface is still based on the global coordinate. I need the result based on the local coordinate system. How can FLUENT do this work? Thanks again. Charles
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
post processing dam break problem chris wetton CFX 7 February 22, 2008 07:33
CFX post processing zurayk CFX 3 February 15, 2007 09:30
Post-processing Eric FLUENT 0 April 19, 2004 11:17
Post processing display problem Jennifer Haque CFX 2 January 18, 2002 12:01
post-processing problem! joseph CFX 3 October 21, 2001 07:17


All times are GMT -4. The time now is 13:32.