|
[Sponsors] |
June 17, 2008, 03:22 |
Refrigerator simulation
|
#1 |
Guest
Posts: n/a
|
Dear all,
I am simulating the air flow inside the refrigerator. Actually I dont want to include the evaporator. Instead of evaporator, I have created the separate fluid zone. Is it possible to give the temperature loss when the air goes through this evaporator fluid zone. How to give input in fluent? Thanks in advance, with regards, JSM |
|
June 17, 2008, 06:06 |
Re: Refrigerator simulation
|
#2 |
Guest
Posts: n/a
|
What about refrigerant? Is it air which is pasing through the evaporator?
If you know net heat transferred then you may choose to apply Heat Flux BC over the wall of your evaporator domain. I have never done such analysis but just it is my idea. |
|
June 18, 2008, 09:22 |
Re: Refrigerator simulation
|
#3 |
Guest
Posts: n/a
|
Hi,
Thanks for reply. |
|
November 18, 2012, 04:01 |
condensor analysis
|
#4 |
New Member
ok
Join Date: Nov 2012
Posts: 1
Rep Power: 0 |
hi,
i am doing analysis of condenser coil in fluent.the inlet condition are vapor at 100 deg celsius and velocity o.2m/s and at coil wall convection h= 10 w/mk ,phases are (primary) vapor and(sec) water,which model is suits better mixture or eulerian pls can any body suggest me |
|
April 22, 2014, 15:14 |
help me
|
#5 |
New Member
Raifmohammed@gmail.com
Join Date: Apr 2014
Posts: 1
Rep Power: 0 |
Assume we want to simulate certain properties of a refrigerator, namely:
capability to maintain maximum inside temperature up to a given maximum outside temperature energy consumption Which systems/subsystems/components properties have to be simulated? |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
no-frost refrigerator | ozgur | CFX | 2 | August 6, 2008 21:11 |
i want advise( In case Refrigerator ) | brown, choi | Main CFD Forum | 1 | October 1, 1998 19:04 |
i want advise( In case Refrigerator ) | brown, choi | Main CFD Forum | 0 | October 1, 1998 03:59 |