CFD Online Logo CFD Online URL
Home > Forums > FLUENT

outflow BC for multiphase system

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   June 27, 2008, 14:40
Default outflow BC for multiphase system
Posts: n/a
Hi, I have a multiphase system with one intet and two outlets (OUTLET-1 and OUTLET-2).

I want to specify that the 15% of the volume flow rate exits from OUTLET-1 and the remaining 85% exits from OUTLET-2.

What type of boundary conditions should I use? I do not know the pressue before hand. FLUENT manual says that the outflow (mass spilit) BC can not be used with multiphase flows.

Please suggest,

Thanks, Kushagra

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
outflow boundary condition for multiphase flow deepak FLUENT 1 June 21, 2007 08:23
is there mass outflow or velocity outflow B.C. kk FLUENT 1 April 12, 2007 10:55
multiphase system, segmentation violation error Kerem FLUENT 1 April 3, 2006 05:42
Multiphase multicomponent system David CFX 0 January 15, 2004 21:59
How to avoid Divergence of multiphase (gas/liquid system) in Fluent :??? mounir Main CFD Forum 1 September 1, 1999 16:30

All times are GMT -4. The time now is 01:38.