CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Free surface volume problem

Register Blogs Community New Posts Updated Threads Search

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 24, 2008, 01:33
Default Free surface volume problem
  #1
Yogesh prajapati
Guest
 
Posts: n/a
hi I have to make analysis on fluent for....There is an open tank which contains water up to some level,remaining part of tank is open to atmosphere having air.At the bottom of the tank there is inlet and outlet which is connected to pump ,means it is flow circulation of water in tank at constant rate.in suction side of the pump there is vortex formation which also suck air with water ,means it is two phase problem.I unable to solve this problem. i am eager for response.
  Reply With Quote

Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[OpenFOAM] Tracking Volume Surface dam break problem sega ParaView 4 July 14, 2009 08:41
free surface problem vuthuan FLUENT 0 February 1, 2009 21:00
CFX Free Surface problem sam CFX 6 March 21, 2007 18:49
Free surface problem Luk CFX 2 July 27, 2006 01:07
free surface problem PLEASE HELP ME varshavian FLUENT 1 February 17, 2003 06:07


All times are GMT -4. The time now is 05:22.