CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   FLUENT (https://www.cfd-online.com/Forums/fluent/)
-   -   Export of data at cells from Fluent. (https://www.cfd-online.com/Forums/fluent/48886-export-data-cells-fluent.html)

Mark July 28, 2008 12:18

Export of data at cells from Fluent.
 
Hi everyone,

I've a mesh of six million or so cells, and would like to specify a shape, encompassing cells I would like to export data from. I've had a search on the forum and found a few posts with similar requests, but no answers.

I've got as far as specifying a cylinder via Region -> Adaption, and marked the relevant cells. Now, I'd like to tell Fluent to assign these cells to a region, then export the data. I can't find a way, however.

Any help would be appreciated.

Best regards,

Mark.


CDE July 28, 2008 18:50

Re: Export of data at cells from Fluent.
 
You can use the marked cell region to split the domian into different zones. Go to Grid->Seperate->Cells. You can then export data from the new zone.

Mark July 29, 2008 04:11

Re: Export of data at cells from Fluent.
 
Brilliant. Job done! Thanks CDE.

Best regards,

Mark.


All times are GMT -4. The time now is 01:43.