CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Export of data at cells from Fluent.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 28, 2008, 13:18
Default Export of data at cells from Fluent.
  #1
Mark
Guest
 
Posts: n/a
Hi everyone,

I've a mesh of six million or so cells, and would like to specify a shape, encompassing cells I would like to export data from. I've had a search on the forum and found a few posts with similar requests, but no answers.

I've got as far as specifying a cylinder via Region -> Adaption, and marked the relevant cells. Now, I'd like to tell Fluent to assign these cells to a region, then export the data. I can't find a way, however.

Any help would be appreciated.

Best regards,

Mark.

  Reply With Quote

Old   July 28, 2008, 19:50
Default Re: Export of data at cells from Fluent.
  #2
CDE
Guest
 
Posts: n/a
You can use the marked cell region to split the domian into different zones. Go to Grid->Seperate->Cells. You can then export data from the new zone.
  Reply With Quote

Old   July 29, 2008, 05:11
Default Re: Export of data at cells from Fluent.
  #3
Mark
Guest
 
Posts: n/a
Brilliant. Job done! Thanks CDE.

Best regards,

Mark.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to export data Ferdinando FLUENT 0 May 28, 2007 13:17
data export Holo FLUENT 5 May 4, 2006 05:24
export data in fluent john FLUENT 2 November 17, 2005 18:40
export nodes, cells and heat transfer coefficients Ademar Cardoso FLUENT 0 September 13, 2005 18:22
How do I export data exactly¡H empire Siemens 0 March 10, 2005 10:44


All times are GMT -4. The time now is 09:56.