CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > FLUENT

Urgent please,Boundry condition

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   July 28, 2008, 12:28
Default Urgent please,Boundry condition
Posts: n/a
My stationary tank is open to atm. which is 1/3 filled with water remaining is atm. air.Tank has one inlet and one outlet at bottom...what should i give boundary condition in the open side.
  Reply With Quote

Old   July 28, 2008, 18:42
Default Re: Urgent please,Boundry condition
Posts: n/a
use a Vent boundary condition
  Reply With Quote

Old   July 29, 2008, 04:41
Default Re: Urgent please,Boundry condition
Tepin Joe
Posts: n/a
If you are not sure of boundary conditions, use outflow. For this problem it will work.
  Reply With Quote

Old   July 29, 2008, 05:12
Default Re: Urgent please,Boundry condition
Posts: n/a
ok i will try
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
How to model a different boundry condition prateek jain CFX 2 May 24, 2007 06:43
what boundry condition? vaishali FLUENT 0 May 7, 2006 07:27
boundry condition problem arashshahin FLUENT 5 February 16, 2005 09:55
wall boundry condition fred FLUENT 0 August 19, 2004 12:10
boundry condition moosa Main CFD Forum 0 November 3, 2002 12:09

All times are GMT -4. The time now is 12:29.