Problems with pressure coefficients
Hi guys I am modelling a flow over a circular cylinder. I don't know why I can't get pressure coefficient to start at 1 (at the moment it is at 1.25). My y+ value is 0.04 which is pretty good. Is there anything I have to watch out for?
Best regards. Khoa. 
Re: Problems with pressure coefficients
did you set the reference values correctly?

Re: Problems with pressure coefficients
Thank you for your reply.
I set the reference velocity to be inlet velocity. My goal is to optimize our model by varying closure coefficients. C_p close to 1 for some sets of closure coefficients but it can be 1.2, even 1.5 for other sets of closure coefficients. I've got no idea why this is happening. 
All times are GMT 4. The time now is 08:42. 