CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Modifying a mesh starting from case file

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By myron

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 12, 2008, 06:35
Default Modifying a mesh starting from case file
  #1
Ale
Guest
 
Posts: n/a
Hi to all,

I have a case file (no original msh or dbs), and I would like to export the grid to Gambit or ICEM-CFD format to modify the mesh, and then set up a new simulation.

What's the best way to do that?

Thanks a lot in advance,

Ale
  Reply With Quote

Old   September 12, 2008, 12:35
Default Re: Modifying a mesh starting from case file
  #2
myron
Guest
 
Posts: n/a
ICEM CFD can load the .cas file directly (File > Mesh > Import Mesh). From that you can do Edit > Mesh to Facets to extract a geometry - then re-mesh.
Phanindra Raavi likes this.
  Reply With Quote

Old   September 16, 2008, 13:10
Default Re: Modifying a mesh starting from case file
  #3
Ale
Guest
 
Posts: n/a
Thanks a lot!
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Replace mesh in the case file Alex Siemens 1 December 10, 2008 12:33
Initial condition data file from coarse mesh case Kushagra FLUENT 1 July 25, 2008 22:53
Export mesh from case file in fluent Sonia FLUENT 1 February 22, 2007 15:09
new mesh, same case file student FLUENT 1 January 29, 2007 11:37
modifying a result file Bony Quach CFX 1 June 23, 2003 14:42


All times are GMT -4. The time now is 18:07.