error during heat transfer solviing
hello...iam solving forced convection over circular cylinder using FLUENT.iam getting the below given message(1*) while simulation is running.what is that "temperature limited to 1.000000e+00." is it a error ? plz somebody help me in this regard....thankyou in advance
(1*).......... itr no. cont resi u resi v resi energy resi time itr 158292 7.9830e-05 1.5186e-05 5.3959e-06 9.3530e+010:03:27 51 temperature limited to 1.000000e+00 in 141400 cells on zone 2 in domain 1 158293 7.7957e-05 1.4715e-05 5.2087e-06 9.3530e+010:03:22 50 temperature limited to 1.000000e+00 in 141400 cells on zone 2 in domain 1 |
Re: error during heat transfer solviing
Yes it would affect your final results do the following checks
1)Check the skewness of your mesh in the region you are getting the limiting values. 2)Check the cp value you have specified and your operating condition of temp. uday |
All times are GMT -4. The time now is 22:33. |