Solidworks IGS to Gambit Problem
 

Hi all i make a 2D model of Spur gear in Solidworks 2008 and save as IGS file and when i try to import it to gambit this error messade appear : GEOM-TRANSLATION LICENSE i want the solution for that Regards.

Re: Solidworks IGS to Gambit Problem
 

Hi, it is for the license, the original license can import or export the IGS files , however there is a form with Catia v5, save as SAT file, your 2d model import to catia V5 and after open in the gambit.

sorry for my english, I´m learning. :),

Regards

Re: Solidworks IGS to Gambit Problem
 

Hi but a can not find SAT file in Catia V5 Regards

Re: Solidworks IGS to Gambit Problem
 

sorry Mustafa, the file is STEP or STP, save the file in catia v5 and after open the gambit in FILE - IMPORT - STEP, and open de file.

Iván

Re: Solidworks IGS to Gambit Problem
 

sorry Ivan the same error is remain ,please send to me your privet E-mail to send to you the error as a picture. Regards

Re: Solidworks IGS to Gambit Problem
 

ok my friend my e-mail is: tristan_rips19@hotmail.com

Re: Solidworks IGS to Gambit Problem
 

i send to you an email if you can to give me your Tel number

Re: Solidworks IGS to Gambit Problem
 

For importing a solidworks component (parasolid, step, iges, all others) i need the geom-trans license file. is there anyone who can help me out here please???? none of the above steps are working. same thing happened with my unographics software too...please help!

Re: Solidworks IGS to Gambit Problem
 

I would contact your network administrator or contact fluent directly. Alternatively, if you're using a cracked version of fluent then you're SOL.