CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

How to output results for specific elements - HELP

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 16, 2009, 09:38
Default How to output results for specific elements - HELP
  #1
Dan
Guest
 
Posts: n/a
I am doing a project which involves modelling turbulent flow in a heat exchanger. I need to be able to say at what distance down the pipe the temperature profile is fully developed (the inner tube is a constant temp and no losses in the outer tube). To do this I would like to plot the temerature of the elements adjascent to the outside wall against distance x down the pipe. So far all I have been able to do is plot the temperature of the outside wall, which doesn't seem to reflect the fluid, or all of the elements in the pipe, from which I can't get anything useful. Any advice on the matter would be much appreiciated! I'm using Fluent 6.2.16. Dan
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to save macro results in the output file? Peggy FLUENT 0 May 21, 2007 04:36
effect of skewed elements in results Sastry FLUENT 0 February 6, 2007 00:45
fluent output pressure of elements in xyz Fred FLUENT 3 July 16, 2005 04:51
CFX-5.7 MPICH Parallel Problem (Output of Results) James Date CFX 7 February 15, 2005 17:03
Automating Fluent Results output Rajil Saraswat FLUENT 7 May 21, 2003 03:35


All times are GMT -4. The time now is 11:41.