CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > FLUENT

multiphase fluid separation in fluent

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   January 19, 2009, 12:20
Default multiphase fluid separation in fluent
Posts: n/a
hi, can fluent model multiphase fluid separation? i am working on the cyclone separator. i used the mixture model for the multiphase fluid and made it underwent high rotating velocity inside the separator, hoping that the centrifugal force resulted will separate the multipahse fluid. However, there seem to be no separation at all. Anyone knows the possible reasons for this?
  Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Multiphase with only one physical fluid Terje CFX 6 June 26, 2007 08:01
FLUENT - Separation Point Query asd FLUENT 1 February 24, 2007 12:19
multiphase model & separation naser FLUENT 5 June 9, 2006 06:12
Non-newtonian fluid and Multiphase flow jemteo CFX 2 February 3, 2006 03:52
Can Fluent Model Separation Columns rakib FLUENT 5 November 12, 2001 05:35

All times are GMT -4. The time now is 07:58.