CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

boundry conditions

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 10, 2009, 14:40
Default boundry conditions
  #1
pardeep kumar
Guest
 
Posts: n/a
hi , i working on Draft tube, at inlet condition in Fluent by putting the value of pressure and i got one contour of draft tube , and next time changing the inlet pressure i got another contour. there is any procedure or method is available that if i have 5 or more values of inlet pressure , the Fluent executes all these pressure without putting them individually and gives five different contours of draft tube. please reply its urgent.
  Reply With Quote

Old   February 15, 2009, 13:30
Default boundry conditions
  #2
kamel
Guest
 
Posts: n/a
hello; i ve some problem in the calcul of the prandtl ,and grashoff numbers in heat transfer in the flow of non newtonian fluid in rectangular cavity. sincerlly .

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
3D airfoil boundry conditions sarat FLUENT 1 July 15, 2009 09:09
Boundry conditions!!!! Zaher CFX 2 March 16, 2004 10:25
Boundry Conditions Parshant Dhand FLUENT 2 January 10, 2003 21:25
Boundry Conditions Parshant Dhand FLUENT 2 January 10, 2003 21:18
Non constant boundry conditions Mounir FLUENT 1 February 14, 2001 09:05


All times are GMT -4. The time now is 22:11.