CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

rotating wall boundary condition in multiphase

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 16, 2009, 21:12
Default rotating wall boundary condition in multiphase
  #1
sdp
Guest
 
Posts: n/a
hi everyone,could someone tell me is specularity coefficient shear boundary condition available for sencond phase at rotating wall? when try to set it ,i found only no slip and specified shear condition are available.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Change wall boundary condition in multiphase? Jacques FLUENT 0 November 27, 2008 06:26
Rotating interpolated boundary condition hani OpenFOAM Running, Solving & CFD 0 July 4, 2006 07:09
How to give boundary condition for rotating frame san FLUENT 4 March 2, 2006 03:56
A:Inquiry of boundary conditions for rotating wall Gaurav FLUENT 0 June 10, 2005 15:52
applying boundary condition on rotating wall Haris Maharana Siemens 2 January 16, 2001 12:03


All times are GMT -4. The time now is 11:42.