|
[Sponsors] |
February 17, 2009, 05:06 |
Boundary Conditions with no influence
|
#1 |
Guest
Posts: n/a
|
Hi, I am a newbie in Fluent. I have a face that I cannot remove from my model, which is supposed to have no influence on the fluid flow. What type of boundary condition can I assign to that face, so that the flow is going through without notice?? An "outflow" seems to be wrong.
Thanks in advance! Chris |
|
February 17, 2009, 05:38 |
Re: Boundary Conditions with no influence
|
#2 |
Guest
Posts: n/a
|
Dear Chris,
you can use an "interior" type face. I usually use it to monitor termofluid-dynamics characteristics where I want them. Bye |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Burgerbs equation non constant Boundary Conditions Initial Conditions | arkangel | OpenFOAM Running, Solving & CFD | 1 | October 2, 2008 14:48 |
Boundary conditions for turbulent boundary layer | Thomas | FLUENT | 1 | June 17, 2008 05:14 |
boundary conditions for boundary layer flow | A. Al-zoubi | CFX | 0 | November 3, 2007 07:11 |
Integral boundary conditions turbulent intensitylength boundary conditions | olesen | OpenFOAM Running, Solving & CFD | 0 | July 27, 2006 07:18 |
Influence of Y+ value | xiang | FLUENT | 3 | February 6, 2004 19:31 |