CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

dynamic mesh problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 23, 2009, 07:19
Default dynamic mesh problem
  #1
chris d.
Guest
 
Posts: n/a
Hi! I have got a problem with a dynamic mesh simulation. It is a 2D problem. A horizontal wall (=valve) moves down into a rectangle (= pipe) by an cg_motion UFD. (it should be somehow a piston valve). The motion itself works but the update of the mesh is not satisfying. There are no additional nodes made on the vertikal sides of the valve. It is always the same number and the cells just get bigger. Does anybody knows which settings have to be made, that additional nodes are created (maybe in Gambit?) I have already tried many ways but I haven't found a solution.

Thank you for your help!!

Chris D.

  Reply With Quote

Old   February 23, 2009, 09:45
Default Re: dynamic mesh problem
  #2
Marco Antonelli
Guest
 
Posts: n/a
The problem should be in the minimum and maximum size of the cells allowed, specified in the dynamic mesh zone definition. How did you set up the mesh motion? Try to lower the maximum value.

bye

Marco
  Reply With Quote

Old   February 25, 2009, 22:29
Default Re: dynamic mesh problem
  #3
Yee-Hern.Tan
Guest
 
Posts: n/a
i think you didn't put any value on adjecent cell size when u setup the dynamic mesh.

Put some value which near to ur cell size u wish to have.
  Reply With Quote

Old   March 2, 2009, 07:02
Default Re: dynamic mesh problem
  #4
chris d.
Guest
 
Posts: n/a
thanks for the help! it is working!
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
dynamic mesh and udf problem boboroo FLUENT 1 January 20, 2008 22:26
Dynamic mesh problem Alain FLUENT 2 December 19, 2006 15:46
Dynamic Mesh Problem - please help! Hila FLUENT 0 August 19, 2006 05:19
Dynamic Mesh Problem !!!!!!! CFDtoy FLUENT 3 January 19, 2005 21:17
A problem in dynamic mesh svh FLUENT 2 October 12, 2004 13:50


All times are GMT -4. The time now is 11:52.