CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > FLUENT

EDEM Particle Sim (wrong place - i know)

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   February 27, 2009, 10:08
Default EDEM Particle Sim (wrong place - i know)
Posts: n/a
Hi, I'm wondering if one of you has been working with EDEM Simulation. I'm setting up my model with spherical granular particles streaming by gravity in a steel case. Whenever a particle is touching a steel wall, it seems to be accelerated to extrem velocity and ist just disappearing. So when touching the bottom, no particle is left in a closed up box. I set up the boundaries just on standard, using steel and coal e.g. Contact model ist hertz-mindlin and frictional paramters around 0.5. I have no clue what the mistake may be! Feel free to help me!!


  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
DPM problem - wrong particle temperature Johannes FLUENT 1 December 1, 2014 13:48
Using createPatch in place of couplePatches sripplinger OpenFOAM Mesh Utilities 8 November 13, 2009 08:14
Place for swirled flows???? Michail CFD-Wiki 1 September 30, 2005 07:18
how to place a radiator? WJQ FLUENT 0 December 25, 2002 22:32

All times are GMT -4. The time now is 23:12.