CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   FLUENT (https://www.cfd-online.com/Forums/fluent/)
-   -   Problems with multiphase modeling (https://www.cfd-online.com/Forums/fluent/64137-problems-multiphase-modeling.html)

magnounibo April 30, 2009 03:59

Problems with multiphase modeling
 
Hi everybody, I got the following trouble modeling a two-phase flow with multiphase modeling: I'm simulating a two-phase flow air-air flowing through a porous media. Just the first of two phases has to pass through porous media so I set porous media coefficient very high for the second. The problem is that second phase seems to disappear before hitting the porous media, and analyzing flux reports I understand that the second phase mass flow was converted in the first phase.
Have anybody every had this kind of problem?

Thanks


All times are GMT -4. The time now is 07:07.