Correct dynamic zones
Dear All,
I am modeling a longitudinally expanding duct with dynamic mesh. In the dynamic zones, I define - the duct walls as "deforming" - the moving wall as "rigid body" I do not define anything else here. Is this a correct zone setup? Thank you for your help. |
There isn't just one way to threat such model.
You can preview the mesh motion, you will see if everything is ok |
The mesh motion is as expected. Does this guarantee the zones are correct?
|
if you don't have any warning about cell quality etc.. then yes
|
mAx,
thank you for your input. |
All times are GMT -4. The time now is 05:34. |