text command problem

hamed_roozegar · May 27, 2009, 02:44

hi to all. how can i define water as material and boundary condition in text command? any example? thank you.

Ralf Schmidt · May 27, 2009, 03:00

Hi!

basically, you can figure out the TUI commands by yourself.
In the Fluent command window, press return and you will see all available commands (the same that are given in the top command menu).
Now, for defining materials type "define" and you come to the next level. Type "return" again and you will see all available commands in this menu (e.g. define materials or define BC) ... and so on.

So, you can navigate by yourself to the desired settings. Take care, some commands are not at the same place as like in GUI.

Now, use the same commands in your journal file.

See for example: http://www.cfd-online.com/Wiki/Fluen..._properties.3F

Best wishes
Ralf

May 27, 2009, 02:44	text command problem	#1
hamed_roozegar New Member sadrooz Join Date: Apr 2009 Posts: 12 Rep Power: 17	hi to all. how can i define water as material and boundary condition in text command? any example? thank you.

May 27, 2009, 03:00		#2
Ralf Schmidt Member Ralf Schmidt Join Date: Mar 2009 Location: Austria Posts: 67 Rep Power: 17	Hi! basically, you can figure out the TUI commands by yourself. In the Fluent command window, press return and you will see all available commands (the same that are given in the top command menu). Now, for defining materials type "define" and you come to the next level. Type "return" again and you will see all available commands in this menu (e.g. define materials or define BC) ... and so on. So, you can navigate by yourself to the desired settings. Take care, some commands are not at the same place as like in GUI. Now, use the same commands in your journal file. See for example: http://www.cfd-online.com/Wiki/Fluen..._properties.3F Best wishes Ralf __________________ CFD - nothing but Colourful Fluid Dynamics

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DPM Particle tracks summary text input	Rajesh Gutti	FLUENT	1	October 17, 2008 02:29
Fluent in text mode	Aris	FLUENT	1	April 15, 2008 07:13
Saving velocity contours to a text file	Craig Johansen	FLUENT	1	March 6, 2007 19:07
rsm,K-epsilon models, donating text on turbulence	francisco saldarriaga	CFD-Wiki	1	May 19, 2006 04:54
TEXT COMMAND	Alex Munoz	FLUENT	0	April 10, 2003 22:32