Including radiation when temperature is expressed as a UDS in porous media

mj_no7 · May 29, 2009, 10:57

Hi all ,

I am trying to model flow in porous media using non-equilibrium model (two different energy equations for the solid and gas phases). Where I used a UDS as the temperature of the solid phase.
My problem now is this: I need to add the effect of radiation emmited from the solid phase. The first thing I tried to do is implement discrete ordinates method using also UDS's, but it was a little difficult. Can anyone help me with that ? it is not necessarily to use discrete ordinates method, any suggestion is welcomed.

Thanks in advance

,
MJ

Rami · May 31, 2009, 09:36

Hi,

You seem to have a similar problem as the one described in the following thread

http://www.cfd-online.com/Forums/flu...ous-media.html

Unfortunately - there is no response by Fluent support and no user interest expressed in solving it... We are now checking with STAR support (which seems much more responsive) if this is possible with their software.

mj_no7 · June 3, 2009, 12:31

thanks Rami for reply.
I checked the thread you gave me, it does look a little similar. Anyway, I think we made good progress with the method I mentioned above (implementing the DO method using UDS's) and that should do it.
Thanks again for your reply.
MJ

May 29, 2009, 10:57	Including radiation when temperature is expressed as a UDS in porous media	#1
mj_no7 New Member mj sharawi Join Date: May 2009 Posts: 14 Rep Power: 16	Hi all , I am trying to model flow in porous media using non-equilibrium model (two different energy equations for the solid and gas phases). Where I used a UDS as the temperature of the solid phase. My problem now is this: I need to add the effect of radiation emmited from the solid phase. The first thing I tried to do is implement discrete ordinates method using also UDS's, but it was a little difficult. Can anyone help me with that ? it is not necessarily to use discrete ordinates method, any suggestion is welcomed. Thanks in advance , MJ

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
UDS porous media	Nagendra	FLUENT	12	August 17, 2022 13:30
UDS for Porous Media	cp	FLUENT	6	June 26, 2012 13:44
Porous media convection UDS equations	cp	FLUENT	1	September 19, 2003 19:53
temperature distribution in porous media	Alexey	Siemens	1	June 23, 2003 01:11
porous media: Fluent or Star-CD?	Igor	Main CFD Forum	0	December 5, 2002 15:16

May 31, 2009, 09:36		#2
Rami Senior Member Rami Ben-Zvi Join Date: Mar 2009 Posts: 155 Rep Power: 17	Hi, You seem to have a similar problem as the one described in the following thread http://www.cfd-online.com/Forums/flu...ous-media.html Unfortunately - there is no response by Fluent support and no user interest expressed in solving it... We are now checking with STAR support (which seems much more responsive) if this is possible with their software.

June 3, 2009, 12:31		#3
mj_no7 New Member mj sharawi Join Date: May 2009 Posts: 14 Rep Power: 16	thanks Rami for reply. I checked the thread you gave me, it does look a little similar. Anyway, I think we made good progress with the method I mentioned above (implementing the DO method using UDS's) and that should do it. Thanks again for your reply. MJ