free Jet Channel
Hello,
i model in 2D a free jet in a air-channel. The nozzle has a width of 1 mm, the channel 50 mm. The heigth of the channel is 100 mm. On the fourth side the channel is open. When i look at the streamlines, the flow is attached to one of the side-walls. I tried different turbulence models as different pressure velocity coupling as unstaedy flow: result flow attached to one wall. I heard that during testing there was no attach visible. (wrong model/wrong test?) best regards Martin Schmitt-Kallenbach manroland AG Germany |
All times are GMT -4. The time now is 21:22. |