CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Natural Convection

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 5, 2007, 05:10
Default Natural Convection
  #1
racheal
Guest
 
Posts: n/a
Hi FLUENT users.

I'm working on a natural convection problem, ie a solar chimney. air will be drawn from the bottom of my system upwards. Due to temperature difference, air will flow through the chimney. I have problems with setting up the parameters in FLUENT. the minimum temperature involved is about 25C whereas teh highest temperature is 80C for this system.

For operating conditions: I have set gravity to be -9.81m/s2, correct? For Boussinesq parameters, what is the operating temperature that I have to set or shall I keep the default value? Do I need to specify variable-density parameters?

For Material (air): I use Boussinesq method to specify density, but do I need to key in a value (by default FLUENT changed to 0)? If so, what is the value? what other parameters that I have to set in the material panel?

I have used PRESTO! for discretization method, is that good?

What else do I have to consider?

Sorry for such a long question, hope to see your reply, thanks!

  Reply With Quote

Old   December 5, 2007, 13:07
Default Re: Natural Convection
  #2
Vaibhav
Guest
 
Posts: n/a
Hi Racheal If you are using Boussinesq approximation, specify density at one ref temp which might be room temp or 25C in your case.

Specify the volumetric coefficient of expansion for air.

Specify density in material panel box (No need to specify variable density parameters)

Please refer the fluent tutorial on natural convection for more details.

Vaibhav
  Reply With Quote

Old   December 5, 2007, 20:17
Default Re: Natural Convection
  #3
racheal
Guest
 
Posts: n/a
hi!

I have actually went through the tutorial 'modeling radiation and natural convection', but I'm not sure why those values were selected, eg the '1000 kg/m3' for density and '1e-5 K-1' for thermal expansion coefficient. I wonder how these values are calculated. Hope to see your reply, thanks!
  Reply With Quote

Old   December 17, 2007, 15:07
Default Re: Natural Convection
  #4
albo30
Guest
 
Posts: n/a
sent to me your file" cas and data" i try to help you
  Reply With Quote

Old   December 18, 2007, 03:08
Default Re: Natural Convection
  #5
Rami
Guest
 
Posts: n/a
Racheal,

Since you deal with air at nearly standard conditions, the ideal gas model may be a good approximation for estimating the thermal expansion coefficient. With this model, the volumetric thermal expansion coefficient =1/T (T in absolute units, e.g., K).

I hope this helps, Rami
  Reply With Quote

Old   September 27, 2009, 00:42
Smile hello,please help me
  #6
New Member
 
zhangmin
Join Date: Sep 2009
Posts: 9
Rep Power: 16
lucifer is on a distinguished road
I read your post in the forum,and I have the same questions with you.since the post is a long time ,I think you must have solve the problems,please please help me!
For operating conditions: how can I set the gravity? For Boussinesq parameters, what is the operating temperature that I have to set or shall I keep the default value? Do I need to specify variable-density arameters?

For Material (air): I use Boussinesq method to specify density, but do I need to key in a value (by default FLUENT changed to 0)? If so, what is the value? what other parameters that I have to set in the material panel?

I have used PRESTO! for discretization method, is that good?
Where can I find the air's thermal expansion coefficient and absorption coefficient?

What else do I have to consider?

I really hope to see your reply, thanks a lot!
please help me !
lucifer is offline   Reply With Quote

Old   September 27, 2009, 00:52
Default
  #7
New Member
 
zhangmin
Join Date: Sep 2009
Posts: 9
Rep Power: 16
lucifer is on a distinguished road
Quote:
Originally Posted by racheal
;147087
Hi FLUENT users.

I'm working on a natural convection problem, ie a solar chimney. air will be drawn from the bottom of my system upwards. Due to temperature difference, air will flow through the chimney. I have problems with setting up the parameters in FLUENT. the minimum temperature involved is about 25C whereas teh highest temperature is 80C for this system.

For operating conditions: I have set gravity to be -9.81m/s2, correct? For Boussinesq parameters, what is the operating temperature that I have to set or shall I keep the default value? Do I need to specify variable-density parameters?

For Material (air): I use Boussinesq method to specify density, but do I need to key in a value (by default FLUENT changed to 0)? If so, what is the value? what other parameters that I have to set in the material panel?

I have used PRESTO! for discretization method, is that good?

What else do I have to consider?

Sorry for such a long question, hope to see your reply, thanks!
I read your post in the forum,and I have the same questions with you.since the post is a long time ,I think you must have solve the problems,please please help me!
For operating conditions: how can I set the gravity? For Boussinesq parameters, what is the operating temperature that I have to set or shall I keep the default value? Do I need to specify variable-density arameters?

For Material (air): I use Boussinesq method to specify density, but do I need to key in a value (by default FLUENT changed to 0)? If so, what is the value? what other parameters that I have to set in the material panel?

I have used PRESTO! for discretization method, is that good?
Where can I find the air's thermal expansion coefficient and absorption coefficient?

What else do I have to consider?

I really hope to see your reply, thanks a lot!
please help me !
lucifer is offline   Reply With Quote

Old   September 27, 2009, 07:17
Default
  #8
Member
 
Akour
Join Date: May 2009
Posts: 79
Rep Power: 16
ak6g08 is on a distinguished road
hello,

a lot of people have been asking about what parameters to use in a natural convection problem. This is exactly why in cfd you should always try to work using non-dimensional numbers, that way you can characterise your problem with any physical properties you use. For natural convection the Rayleigh number is what you are interested in, depending on what sort of convection you want to see you can choose this number accordingly, along with th Reynolds number which will define the level of turbulence.

so to answer the question, type rayleigh number in to google and look at how it is calculated. Also, remember that the the boussinesq approximation is NOT always the way to go, i recommend you look up the limitations of using the boussinesq approximation, e.g. for large temperature gradients and specific thermal expansion coefficients the boussinesq approximation is not good. Instead of the boussinesq approximation you could calculate density on each iteration using a 1st order polynomial = rho(T)=rho(0) + beta*DT sort of thing

hope that helped a bit.
good luck
__________________
akour
ak6g08 is offline   Reply With Quote

Old   September 28, 2009, 09:41
Default re: natural convection
  #9
New Member
 
Join Date: Jul 2009
Posts: 5
Rep Power: 16
avuttide is on a distinguished road
Hi, About the problem of the parameter that you set in fluent in boussinnesq appox. I think that everything depends on the reference temperature that you want to use; that means, density change with temperature and so the thermal expansion.... once u decide the bulk/refernce temperature, this will be the the operating temperature in the operating condition pannel....
for this temperature check in the web the density, and the thermal expansion parameter and put the value in the material pannel.
using density-boussinsq model, means using a density constant value but you have to indicate how... that means that is you reference temperature value is the default Fluent reference temperature, density will have the default density reference value.
For the other parameter try to use the default parameter of the fluid that you are using.

however on the Udf manual there is a strategy for natural convenction
and I have find very very helpful; they suggest both PRESTO! and also body force weighted.

hope it helps
avuttide is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
natural convection problem with radiation jorien CFX 0 October 14, 2011 10:26
Natural Convection with heat generation krishnachandranr Main CFD Forum 0 July 28, 2009 05:22
Coupled vs Seg - Natural vs. Forced Convection Alex Siemens 5 December 12, 2007 05:58
natural convection at high Rayleigh mauricio FLUENT 2 February 23, 2005 20:43
Mixing By Natural Convection Processes Greg Perkins FLUENT 0 February 12, 2003 19:40


All times are GMT -4. The time now is 04:40.