Heating of a metal piece in a furnace
Hello everyone,
I am trying to view the heating profile of a metal piece within a furnace using Fluent. I've built the geometry in Gambit and now I wanna solve this problem in Fluent but I have a problem: it doesn't work. I can see the heating profile in the furnace and I can see that the metal piece is disturbing the "natural" flow, but I cannot see the profile inside it (no conduction). Does anyone have any idea how to "activate" conduction or how to include that piece in the calculus ? |
Hi Paulik,
Did you choose the solid property for your metal piece? And did you selected the coupled option in the wall between the fluid and the metal piece? |
Heating of a metal piece in a furnace
Yeah, I set all the properties. I also have the wall set to coupled. Look, uploaded a photo with the boundary conditions. Maybe the geometry isn't good. I don't know why it isn't working. The flow near the metal piece is deviated but the temperature inside in constant.
http://www.eucred.ro/profil.jpg As you can see, the metal piece is neutral. |
Hi,
I did a mistake last week. May be you have the same one. In my case I expected a clear temperature distribution, but because of the different heat capacities the temperature distribution was vely smooth inside of my metal pice. Please try to plot the temperature distribution from the wall of the metal pice to several milimeters inside. May be it helps. If you allredy done this, I have no other sugestions. Good luck |
Heating of a metal piece in a furnace
:(( I've already done this. I have made a XY Plot (Temperature vs Lenght inside the body) to see if there is any heat at the boundary but nothing and I also changed the thermal conductivity coefficient for the metalic piece with a value closer to the one of the fluid.
Thanks a lot Johann for trying to help me. If maybe there are any other person that could help me? |
Hi paulik,
whats about your y+ value. I read in a anothe forum that this value should be between 1 and 3. |
Heating of a metal piece in a furnace
Where can I see the y+ value?
I know about the Yplus of the turbulence model but only for plotting and its value is 0 constant. |
You can find it in:
Display->Contours->Contours of: Turbulence and Wall Yplus |
Yeah, that one is 0. I have nothing inside. Any suggestion ?
|
As I understood, you have only buoyant flow. Do you consider the gravity and the temperature dependent density?
|
Nope. No gravity and no temp-dens dependence
|
I'm not shure, but could you post a picture with your mesh at the wall?
|
|
I think it has somethink to do with der wall funktion(boundary layer).
If you look at the exuiations of the heat transport (fluent documentation), and the exuiation of y+, there is alwais a term for turbulenc. And if you have only boujant flow, may be there is no turbulence. |
Hi I just calculated your case and there was the same problem, no heat flux to the metal piece. But after a patch of the turbulent kinetic energy there was a heat flux.
So I think you need some turbulence to transfer the heat.(see the equations in fluent documentation) I think you can solve the problem with a UDF. Please let me know if you have successful calculated the case. |
First of all I want to THANK you so much for helping me and secondly I think I'm screwed up in the head. It doesn't work to me. I Initialize the Turbulent Kinetic Energy Patch to the both interiors but I see no changes. I think I did something wrong from the beginning.
Let me tell you what I defined and maybe you can see the problem from this, if it worked for you. So, I defined the following: Boundary Conditions:
Viscous: Viscous Heating Activated + Viscous Model K-epsilon Materials: Aluminum (solid) and Air (fluid) and the Initialization from the left/right walls. This is what I am using. If you think something's not right, please let me know. Once again, Thanks a lot dude for helping, Paul |
hi,
i have the same BC's and additionaly I activated the gravity. I also use temperature dependent density and heat capacity of the air. But this is not the problem, the velocity distribution on the fluid seems to be physical allright. I used the laminar solver, because there is no turbulence in the computational domain. The question is: how is the heatflux calculatet in a laminar case?:confused: I'm now trying to find it out.:mad: |
Hi,
I was reading your post and I do not understand one thing. In your geometry you have heatflux on side walls. Top and bottom walls are set to 300K - constant temperature. Up to this point it is ok. Than you define all walls of the box to be 300K. If this is a boundary condition, than the surface will simply cool the fluid around, and that is what I see on the picture. I think that you should set this side wall of the box with zero (0) heatflux instead of temperature condition. Maybe specify tempeature at the bottom of the box, than you should have heat transfer in solid. Correct me if I am wrong. Good luck |
Still not working
Now the walls of the metallic body are set to Coupled and 0 on Heat Generation. I also set the Laminar Solver.
I now have this profile: http://www.eucred.ro/noulprofil.jpg Which is also abnormal because now I have constant temperature inside the body. This is a messed-up problem. Another strange thing is the temperature profile inside. Take a look at this XY Plot: http://www.eucred.ro/noulprofilxy.jpg I understand something happens there. I have a temp. drop on the down corners of the body. Oh, and I also included the Gravity (y=-9.81) as Johann recommended. |
Hi Paulic,
I yust calculated your problem again and I have some good results. I have a heatflux through the aluminum wall and the temperature is slowly inkreasing. We were to impatient;), the result apears after some xK iterations. Now its up to you to evaluate the physiks of the modell. Give me your e-mail and I will send you the case file. |
Just a question. It takes more than 10000 iterations for heating the metallic body for you too ? I scaled the grid to mm and I increased the heat flux but it still takes a lot of time. Do you have the same problem ?
|
I have had the same problem. I think the results are correct. You should calculate and validate them with analytical equations.
I am now calculatin a vice versa case, I have a tube(quarzglas) and this is heated by a gasburner up to 1790 K. The heat transfer to the air inside the tube is going very (fast), to compare to your case. This is bacause of the different Heat Transfer and Heat Capacity coefitionts of the air and the metall pice. As I sad, to bee sure calculate them analytical, the equiations for this case shuld be not difficult.;) |
still a problem
are you still trying to solve this problem?
|
Yeah still working on it.
Johann, i'm still trying to solve it. I tried it in milions of ways but nothing. I'll post, again, a picture with a sample of it. The furnace's interior heats perfectly, exept the metal sample. I don't know how can I "activate" the conduction. I think this is the problem. I tried to set that sample as a solid zone and nothing. I left it as default - nothing. I tried to build it in Gambit using sweep for every face, made it a full body then splitting in a lot of faces etc. and nothing. I don`t know what else to do. Here is the picture. https://mail.uaic.ro/%7Eliconst/1.jpg |
All times are GMT -4. The time now is 17:57. |