About Transient Table

Takeoff · December 15, 2009, 09:14

Hi

I've a problem about transient table that I input in FLUENT.
I've created data type PROF << I think I do it right.

The question is How should I know that this transient table data is read in FLUENT correctly.

How can I check it?

Wait for your help

thanks

madmechanic · July 29, 2019, 16:37

Hi, I am also trying to use a transient tables to apply my boundary condition. However when I type in the following commands into the ansys console
file

/file>read-transient-table
transient-table file name [] (insert name)

ANSYS displays the error shown below. I made file on wordpad using the correct format and saved with txt extension. I saved the file to my desktop. Can you help me with this?

Error: File "insert name" not found!
Error Object: #f

Светлана · July 29, 2019, 20:10

Make sure your file is in the same directory as your fluent simulation. When prompted with '(insert name)', type the name of your file after it, and then press enter. Does it work then?

madmechanic · July 30, 2019, 06:30

Hi Svetlana I have done as you have asked and saved the file in the same directory that my fluent file is saved in. However, ansys still cannot find the file. Any toughts on how I can resolve this issue? also does the transient table have to be saved as text document (.txt) extension?

Светлана · July 30, 2019, 07:00

I would like to see a screenshot of the error message. Your command and your input should also be visible on the image. Please attach a screenshot with your next reply?.

Shoonya · August 10, 2021, 01:23

Quote:

Originally Posted by madmechanic

Hi, I am also trying to use a transient tables to apply my boundary condition. However when I type in the following commands into the ansys console
file

/file>read-transient-table
transient-table file name [] (insert name)

ANSYS displays the error shown below. I made file on wordpad using the correct format and saved with txt extension. I saved the file to my desktop. Can you help me with this?

Error: File "insert name" not found!
Error Object: #f

When you launch fluent, in the GUI there is General Options> Working Directory
Here set the path to a desired directory and put that .txt file in that directory. Then fluent will be able to see this file and will be able to load.

December 15, 2009, 09:14	About Transient Table	#1
Takeoff New Member Hassan Join Date: Oct 2009 Posts: 3 Rep Power: 16	Hi I've a problem about transient table that I input in FLUENT. I've created data type PROF << I think I do it right. The question is How should I know that this transient table data is read in FLUENT correctly. How can I check it? Wait for your help thanks

July 29, 2019, 16:37		#2
madmechanic New Member Abdullah Tariq Join Date: Apr 2018 Posts: 5 Rep Power: 8	Hi, I am also trying to use a transient tables to apply my boundary condition. However when I type in the following commands into the ansys console file /file>read-transient-table transient-table file name [] (insert name) ANSYS displays the error shown below. I made file on wordpad using the correct format and saved with txt extension. I saved the file to my desktop. Can you help me with this? Error: File "insert name" not found! Error Object: #f Светлана likes this.

July 30, 2019, 06:30		#4
madmechanic New Member Abdullah Tariq Join Date: Apr 2018 Posts: 5 Rep Power: 8	Hi Svetlana I have done as you have asked and saved the file in the same directory that my fluent file is saved in. However, ansys still cannot find the file. Any toughts on how I can resolve this issue? also does the transient table have to be saved as text document (.txt) extension? Светлана likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
transient simulation of a rotating rectangle	icesniffer	CFX	1	August 8, 2009 07:25
transient results chart or table	haconk	CFX	1	May 6, 2009 02:49
Table Manipulation	furkan	Siemens	0	April 4, 2006 10:23
transient results in table viewer	Andrew Fine	CFX	2	December 15, 2005 23:39
Transient user input table	Bart	Siemens	0	January 10, 2005 01:27

July 29, 2019, 20:10		#3
Светлана Senior Member Svetlana Tkachenko Join Date: Oct 2013 Location: Australia, Sydney Posts: 407 Rep Power: 14	Make sure your file is in the same directory as your fluent simulation. When prompted with '(insert name)', type the name of your file after it, and then press enter. Does it work then?

July 30, 2019, 07:00		#5
Светлана Senior Member Svetlana Tkachenko Join Date: Oct 2013 Location: Australia, Sydney Posts: 407 Rep Power: 14	I would like to see a screenshot of the error message. Your command and your input should also be visible on the image. Please attach a screenshot with your next reply?.