Error during Iteration
I am working as an RA , i am working on simulation of flaring stacks . yesterday i made a small 2d geometry to test my mechanism results .
Reading "C:\Documents and Settings\Anjan\jan22-1.msh"... 32361 nodes. 200 mixed symmetry faces, zone 3. 80 mixed velocity-inlet faces, zone 4. 40 mixed velocity-inlet faces, zone 5. 40 mixed wall faces, zone 6. 200 mixed pressure-outlet faces, zone 7. 160 mixed pressure-outlet faces, zone 8. 63640 mixed interior faces, zone 10. 32000 quadrilateral cells, zone 2. Building... grid, materials, interface, domains, zones, default-interior tp-po side-po exterior air jet axis fluid shell conduction zones, Done. Grid Check Domain Extents: x-coordinate: min (m) = 0.000000e+000, max (m) = 1.000000e+000 y-coordinate: min (m) = 0.000000e+000, max (m) = 5.000000e+000 Volume statistics: minimum volume (m3): 1.637497e-006 maximum volume (m3): 5.801886e-004 total volume (m3): 5.000000e+000 Face area statistics: minimum face area (m2): 4.999992e-005 maximum face area (m2): 2.523024e-002 Checking number of nodes per cell. Checking number of faces per cell. Checking thread pointers. Checking number of cells per face. Checking face cells. Checking bridge faces. Checking right-handed cells. Checking face handedness. Checking face node order. Checking element type consistency. Checking boundary types: Checking face pairs. Checking periodic boundaries. Checking node count. Checking nosolve cell count. Checking nosolve face count. Checking face children. Checking cell children. Checking storage. Done. But after giving all the condition and iterating it giving errors like cell id =xxxx with cell centriod ( xx,xx) failed cell id =xxxx with cell centriod ( xx,xx) failed cell id =xxxx with cell centriod ( xx,xx) failed cell id =xxxx with cell centriod ( xx,xx) failed cell id =xxxx with cell centriod ( xx,xx) failed total no of cells failed = 40 iteration 2 and the same story please help me on this error |
All times are GMT -4. The time now is 14:48. |