CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   FLUENT (https://www.cfd-online.com/Forums/fluent/)
-   -   Error in importing geometry from solidworks 2010 to Gambit 2.4.6 (https://www.cfd-online.com/Forums/fluent/72258-error-importing-geometry-solidworks-2010-gambit-2-4-6-a.html)

ck3 January 30, 2010 14:27

Error in importing geometry from solidworks 2010 to Gambit 2.4.6
 
I created a geometry in solidworks 2010 and I imported it to Gambit 2.4.6
while following the instructions of this link :
http://hmf.enseeiht.fr/travaux/CD030...swfm/index.htm
but I had this error message:
ERROR: Translation requires license feature geom-trans
ERROR: Translation failed
any help please.

ck3 January 30, 2010 16:05

I found the solution, the problem was in license.

timjm July 26, 2010 18:48

How did you fix the license?

lihui54312 July 26, 2010 23:13

yes ,i faced the same the problem age.this was the license,if use the pirate software. pls buy the true soft

lukaszss September 9, 2010 09:59

OK, but how to solve this problem when you can't afford to buy legal software? I add that I use this sort of programmes only for personal-educational purposes.


All times are GMT -4. The time now is 10:47.