|
[Sponsors] |
March 3, 2010, 17:28 |
k-e standard wall function and y+
|
#1 |
Senior Member
François Grégoire
Join Date: Jan 2010
Location: Canada
Posts: 392
Rep Power: 17 |
Please see the attached jpg. Is it right for the k-e model using Standard wall function?
Fluent solves the k-e equations, regardless of the y+, for the all the cells except the wall adjacent ones? The log-law or the linear-law are used ONLY between the wall and the first adjacent centroid? Cheers |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Compile problem | ivanyao | OpenFOAM Running, Solving & CFD | 1 | October 12, 2012 10:31 |
[blockMesh] BlockMesh FOAM warning | gaottino | OpenFOAM Meshing & Mesh Conversion | 7 | July 19, 2010 15:11 |
latest OpenFOAM-1.6.x from git failed to compile | phsieh2005 | OpenFOAM Bugs | 25 | February 9, 2010 05:37 |
Error with Wmake | skabilan | OpenFOAM Installation | 3 | July 28, 2009 01:35 |
[blockMesh] Axisymmetrical mesh | Rasmus Gjesing (Gjesing) | OpenFOAM Meshing & Mesh Conversion | 10 | April 2, 2007 15:00 |