CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

VOF Volume fraction in Velocity inlet

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 18, 2010, 09:40
Default VOF Volume fraction in Velocity inlet
  #1
New Member
 
amélie ruelle
Join Date: Mar 2010
Posts: 1
Rep Power: 0
aruelle is on a distinguished road
Hello

I am using a VOF model for the simulation of a diphasic flow entering a pipe and then spilled in a tank. The entry of the diphasic flow is defined as a velocity inlet. The volume fraction of the velocity inlet in fixed to 0,3. Convergence is ok. Moreover, i saw different works where the volume fraction of the velocity inlet is different from 1 or 0.
Nevertheless, i read in an Ansys document that for velocity inlet, only one phase can enter; therefore, only one phase can have the inlet volume fraction set to 1 and nonzero inlet velocity.
So, can somebody help me about this? Is it allowed and physically correct to impose a volume fraction of 0,3 to a velocity inlet with the vof model?
Thank you very much for your help,
Amélie
aruelle is offline   Reply With Quote

Old   March 18, 2010, 12:53
Default
  #2
Senior Member
 
sega's Avatar
 
Sebastian Gatzka
Join Date: Mar 2009
Location: Frankfurt, Germany
Posts: 729
Rep Power: 20
sega is on a distinguished road
Quote:
Originally Posted by aruelle View Post
Hello

I am using a VOF model for the simulation of a diphasic flow entering a pipe and then spilled in a tank. The entry of the diphasic flow is defined as a velocity inlet. The volume fraction of the velocity inlet in fixed to 0,3. Convergence is ok. Moreover, i saw different works where the volume fraction of the velocity inlet is different from 1 or 0.
Nevertheless, i read in an Ansys document that for velocity inlet, only one phase can enter; therefore, only one phase can have the inlet volume fraction set to 1 and nonzero inlet velocity.
So, can somebody help me about this? Is it allowed and physically correct to impose a volume fraction of 0,3 to a velocity inlet with the vof model?
Thank you very much for your help,
Amélie
For a volume fraction you will need a volume, where a boundary is a face.
So this does not make sense.

You want to set up 30% of the inlet with phase one and 70% of the inlet with phase two? Am I guessing right?

I would split up the inlet into two (30%/70%) and define the VOF-variable to 0 at the one and 1 at the other.
__________________
Schrödingers wife: "What did you do to the cat? It's half dead!"
sega is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
mass flow in is not equal to mass flow out saii CFX 12 March 19, 2018 06:21
Multi phase Volume fraction at inlet F S CFX 1 April 11, 2011 22:08
Volume Fraction vs Velocity???? HAR FLUENT 2 May 30, 2006 17:30
VOF & initial volume fraction Mark FLUENT 2 April 26, 2006 19:18
UDF problem : inlet velocity in cyl. coord. system Jongdae Kim FLUENT 0 June 15, 2004 12:21


All times are GMT -4. The time now is 20:40.