FLUENT Speed Issues on Cluster

cfd23 · April 1, 2010, 18:12

Hi,

I have several FLUENT sessions running concurrently at a supercomputing facility. The scripts are prepared and the job is launched from MATLAB. The geometries / mesh cell size are the same, with only minor differences between the sessions (eg velocity and angle of attacks).

I have noticed there are drastic speed issues between the sessions. Submitting a direct job through qsub, I get a converged solution (eg maximum iterations of 3000) within minutes, yet the jobs prepared and launched from MATLAB are taking hours.

Therefore, I'm not getting the accelerated computation that would be expected by parallelising the geometry (in this case I use 4 nodes per geometry) on the cluster. However, when I directly submit the same case by using qsub we get an accelerated solution; but not from MATLAB.

Can you please advise what is causing these speed issues? Attached below
is the code:
================================================== ========================
#!/bin/bash

. /etc/profile.d/modules.sh

export LD_LIBRARY_PATH=/usr/lib64
cd shape1
module load fluent/v120
fluent 2ddp -g -t4 -i
/home/ /matlab/xfoil_optz/shape1/Fluent_Airfoil_1.jou >&
/home/ /matlab/xfoil_optz/shape1/fluent_1.out
================================================== ========================
All flow conditions are in Fluent_Airfoil_1.jou.

Thanks

DoHander · April 2, 2010, 19:27

Maybe Matlab doesn not let you to fork four processes when you launch Fluent from it. Do you have a parallel Matlab license ?

If you want to be safe better use a simple bash script to launch Fluent !!!

Do

cfd23 · April 3, 2010, 23:43

No, MATLAB is indeed running in parallel. I have alot of operations prior to calling FLUENT (eg. mesh generation) which all run as expected in parallel. Also in the case reported, I had 8 concurrent FLUENT sessions running; 5 converged in ~17 mins, while the remaining 3 took over 5 hours!

I do use a bash script for FLUENT (attached in original msg.), so that works fine (sometimes). Again the mesh size and type are the same, but it seems in some cases there are some major issues which affect the speed for some random cases.

Any ideas?

April 1, 2010, 18:12	FLUENT Speed Issues on Cluster	#1
cfd23 New Member Join Date: Jul 2009 Posts: 6 Rep Power: 16	Hi, I have several FLUENT sessions running concurrently at a supercomputing facility. The scripts are prepared and the job is launched from MATLAB. The geometries / mesh cell size are the same, with only minor differences between the sessions (eg velocity and angle of attacks). I have noticed there are drastic speed issues between the sessions. Submitting a direct job through qsub, I get a converged solution (eg maximum iterations of 3000) within minutes, yet the jobs prepared and launched from MATLAB are taking hours. Therefore, I'm not getting the accelerated computation that would be expected by parallelising the geometry (in this case I use 4 nodes per geometry) on the cluster. However, when I directly submit the same case by using qsub we get an accelerated solution; but not from MATLAB. Can you please advise what is causing these speed issues? Attached below is the code: ================================================== ======================== #!/bin/bash . /etc/profile.d/modules.sh export LD_LIBRARY_PATH=/usr/lib64 cd shape1 module load fluent/v120 fluent 2ddp -g -t4 -i /home/ /matlab/xfoil_optz/shape1/Fluent_Airfoil_1.jou >& /home/ /matlab/xfoil_optz/shape1/fluent_1.out ================================================== ======================== All flow conditions are in Fluent_Airfoil_1.jou. Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
how to use -ssh w/ Fluent on Linux cluster	Bill	FLUENT	4	April 2, 2014 00:04
Rocks and linux for fluent cluster	Far	FLUENT	2	March 2, 2012 09:31
Fluent connection with simulink by TCP/IP	Tanktruck	Fluent UDF and Scheme Programming	1	June 28, 2009 12:56
Linux cluster for Fluent 6.3.26	Far	Hardware	2	April 5, 2009 07:36
Problems in lauching FLUENT	Lourival	FLUENT	3	January 16, 2008 16:48

April 2, 2010, 19:27		#2
DoHander Senior Member Join Date: Nov 2009 Posts: 411 Rep Power: 19	Maybe Matlab doesn not let you to fork four processes when you launch Fluent from it. Do you have a parallel Matlab license ? If you want to be safe better use a simple bash script to launch Fluent !!! Do

April 3, 2010, 23:43		#3
cfd23 New Member Join Date: Jul 2009 Posts: 6 Rep Power: 16	No, MATLAB is indeed running in parallel. I have alot of operations prior to calling FLUENT (eg. mesh generation) which all run as expected in parallel. Also in the case reported, I had 8 concurrent FLUENT sessions running; 5 converged in ~17 mins, while the remaining 3 took over 5 hours! I do use a bash script for FLUENT (attached in original msg.), so that works fine (sometimes). Again the mesh size and type are the same, but it seems in some cases there are some major issues which affect the speed for some random cases. Any ideas?