CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

FLuent Parallel Error.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 8, 2010, 02:39
Default FLuent Parallel Error.
  #1
Member
 
Join Date: Sep 2009
Posts: 69
Rep Power: 16
DarrenC is on a distinguished road
Hi everyone,

I am simulating a 3D dynamic stall phenomena of an airfoil. I use the dynamic mesh method to smooth and remesh the mesh at every time step and a udf to pitch the airfoil and i have a non conformal interface. I initially run the steady state solver in parallel with 4 processes for 2000 iterations w/o dynamic mesh and udf and it runs fine. But when I switch dynamic mesh and transient solver on, the simulation crashes after approximately 300 time steps with the following message :

999999 (..\src\mpsystem.c@1148): mpt_read: failed: errno = 10054

999999: mpt_read: error: read failed trying to read 4 bytes: No such file or directory
The Parallel FLUENT process could not be started.

Does anyone know what can cause this problem? For your information I am running Fluent v12 with an i7 860 quad core with 8gb of RAM and my mesh size is approximately 2.5 million.

Regards,
Darren
DarrenC is offline   Reply With Quote

Old   April 10, 2010, 22:26
Default
  #2
Member
 
Join Date: Sep 2009
Posts: 69
Rep Power: 16
DarrenC is on a distinguished road
Anyone out there knows whats the problem? Im desperate to get this problem fixed....

Cheers
Darren
DarrenC is offline   Reply With Quote

Old   July 9, 2010, 16:22
Default
  #3
Member
 
kdrbrk's Avatar
 
Burak
Join Date: May 2009
Posts: 90
Rep Power: 16
kdrbrk is on a distinguished road
I have same problem too, anyone have any solution??
kdrbrk is offline   Reply With Quote

Old   July 22, 2010, 18:26
Default
  #4
New Member
 
Join Date: Jul 2010
Posts: 5
Rep Power: 15
ecfd is on a distinguished road
Sometimes, it may help to turn of Dynamic mesh load balancing in the parallel->partition and load balancing panel
ecfd is offline   Reply With Quote

Old   September 14, 2010, 03:06
Default
  #5
New Member
 
Join Date: Sep 2010
Posts: 1
Rep Power: 0
drag0 is on a distinguished road
I had this same problem, but got rid of it when I went back to Pointwise (from which I had exported the grid) and defined the volume conditions. This worked for me on two separate cases so it's definately worth a try.
drag0 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
erros when compiling simpleSRFFoam examosty OpenFOAM Installation 12 April 26, 2010 19:53
Version 15 on Mac OS X gschaider OpenFOAM Installation 113 December 2, 2009 11:23
error in fluent parallel version-can anybody help! user FLUENT 0 February 16, 2009 03:04
error of Parallel fluent in 3d -t2! sanmango FLUENT 1 May 18, 2005 12:26
error parallel fluent session Diet FLUENT 2 January 27, 2005 13:31


All times are GMT -4. The time now is 22:08.