CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

CH4 gas-phase reaction and stiff chemistry solver

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 15, 2010, 22:01
Default CH4 gas-phase reaction and stiff chemistry solver
  #1
New Member
 
tianyu
Join Date: Mar 2010
Posts: 2
Rep Power: 0
sonosun is on a distinguished road
Hi,
I am simulating the methane/air combustion in micro-channel using elementary reactions.

I used the seperate solver, and firstly without 'stiff chemistry solver', however the residual curve oscillate in a very large range and can't converge. Then I choose the 'stiff chemistry solver', it showed a good effect, but after about several thousands steps, there would be some errors:'ISAT reaction rate: Temperature = '.

Any sugestions? I just use the 'stiff chemistry solver' as its default values, do anyone know its appliction method or about the methane gas-phase reaction?

Best regards
sonosun is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 17:54.