CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   FLUENT (https://www.cfd-online.com/Forums/fluent/)
-   -   How to create two fluid zones????? (https://www.cfd-online.com/Forums/fluent/76352-how-create-two-fluid-zones.html)

rahulangal May 23, 2010 11:59

How to create two fluid zones?????
 
i hv an problem creating two zones of fluid in fluent...
the problem is ..
i hv to define two fluids in same container below 10% is fluid1 & above 90% is fluid2 ...

can any body plz help me ???

-mAx- May 25, 2010 02:19

return in your Mesh-software, and define them as separated fluid zone

rahulangal May 26, 2010 04:32

Thanx
 
hay.. actually i defined fluid zones in gambit but i want to apply boundry condition in fluent, how can i apply zone bc if i m using a transport & mixing model for my problem???

-mAx- May 26, 2010 05:02

if your fluid zone is well defined in Gambit (Specify Continuum), then you are able to see this fluid zone in the BC panel from fluent.

rahulangal May 27, 2010 11:44

thanx...
 
hay thanx for ur reply..
i cud see the fluid zones in fluent BC panel but, how to define dat bc in transport & mixing reaction model.. wud u plz elaborate????

-mAx- May 28, 2010 02:16

There are tutorials about transport and mixing planes. Check them


All times are GMT -4. The time now is 06:30.