CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

lost of mass conversation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 17, 2010, 09:53
Default lost of mass conversation
  #1
New Member
 
christophe
Join Date: Aug 2009
Posts: 24
Rep Power: 16
jjchristophe is on a distinguished road
I am doing computation under Fluent 6.3 to model blood flow in arteries.
recently, as I wasn't satisfied with my results, I decided to check my udf with a simple cylinder.
Among different tests, I set a constant pressure outlet condition directly under fluent, and by changing one udf code, to ensure that the results will be the same.
the test was done for steady case.
I have been really surprised by the results i obtained: for a pressure condition of 0 at the outlet, everything is correct, but if I set a non 0 value ( I tried with 2000, 200 and 1) the mass conservation is not respected anymore (the difference between inlet and outlet volume flow rate is in the order of 1000% at least!). I have done the same test with my patient specific mesh, containing 19 outlets and 1 inlet, and there the mass conservation is respected.
I also tested with another cylinder, with a finer mesh, and then again, the mass conservation was lost (for a pressure of 2000 at the outlet, the outlet flow rate is 2x10^3 times the inlet flow rate).
I am wondering if this can be due to the fact that, for any reason, fluent consider the fluid as compressible. I read through the manual, but couldn't find a precise way to set or unset the compressibility of the fluid, apart from selecting ideal gas in density, which i haven't done.
If you have any idea about why I have this situation and how to tackle it, that would be very appreciated.
thank you very much.

edit:
I don't understand what went through my mind, the title should be read "lost of mass conservation" instead of "lost of mass conversation" of course.

Last edited by jjchristophe; June 18, 2010 at 00:39.
jjchristophe is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
mass flow in is not equal to mass flow out saii CFX 12 March 19, 2018 06:21
Target Mass Flow Rate Nitin FLUENT 9 June 17, 2017 11:30
Running dieselFoam error adorean OpenFOAM Running, Solving & CFD 119 February 1, 2016 15:41
questions about species transport through walls shuqin FLUENT 13 April 9, 2014 03:42


All times are GMT -4. The time now is 06:00.