|
[Sponsors] |
July 9, 2010, 09:33 |
porou jump, permeability
|
#1 |
New Member
Join Date: Jul 2009
Posts: 8
Rep Power: 16 |
Hy all,
I trying to set porous jump model in fluent to model 3D flow over perforated plate (cca, 10 mm in thickness). I computed inertial resistance and face permeability according to fluent 6.3 User guide 7.19.6 paragraph based on tabulated values of delta pressure - velocity (dp-c) dependence. The dp-c was determined based on detail fluid flow over element of the perforated plate. I approximated dp-c dependence by quadratic equation: dp=a*c^2 + b*c But the b coefficient is negative for my case and thus the permeability value (alfa) too. Problem is that fluent does not accept negative value of alfa. How to input the alfa? if I thing that the model with dp=.. -b*c is different to the dp=.. +b*c. By the way the value of alfa is rather small (of order of 1.e-7) - thus enhancing einfluence of inertial resistance. Order of C2 (inertial resistance coefficient) is cca 500 for the plate. Thanks. |
|
April 15, 2014, 23:52 |
|
#2 |
New Member
Join Date: Apr 2014
Posts: 29
Rep Power: 12 |
Hello,
I am Having the same problem with the same procedure can someone please enlighten us. thank you. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
UDF: DEFINE_CG_MOTION for vertical jump motion of an electrode! | alban | Fluent UDF and Scheme Programming | 2 | June 8, 2010 18:54 |
Pressure jump and momentum source | Tanya | FLUENT | 1 | June 4, 2009 15:22 |
Porous Jump | Naresh | FLUENT | 0 | April 25, 2007 15:36 |
correct assignment of permeability? | jemteo | CFX | 0 | March 17, 2006 05:34 |
Please Help ! Pressure Jump of Fan?? | Boris | FLUENT | 0 | January 28, 2003 20:26 |