CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

mesh missing after import in fluent

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 23, 2010, 03:22
Default mesh missing after import in fluent
  #1
Senior Member
 
morteza08's Avatar
 
Morteza
Join Date: May 2010
Location: Iran,Islamic Republic of
Posts: 161
Rep Power: 15
morteza08 is on a distinguished road
hi all
i modeled a delta wing (figure 1) in gambit..
i design two volume around it...an interior volume within the exterior..
here are the steps i did for it::
1: import vertices coordinates of the wing..
2: making 5 edges,4faces and 1 volume for the wing..
3:designing the exterior volume
4;subtracting the wing from the exterior volume
5:designing interior volune
6:splitting the bigger volume with interior volume..i mean i devide the exterior volume into two parts.
7:after this , the wing volume is created again, i deleted it again..
now i have two vlolume, one between the wing and the interior volume,,,and the other between the the interior and exterior..
8: for meshing, first i mesh all 4 faces of the wing, then i mesh the space between wing and interior volume with small mesh, and then between interior vol. and exterior with coarse mesh..
9: then i define B.C for all 3 faces of the exterior vol as press. far field..
and define the all volume as fluid..
10;; i export the model as mesh, and dbs..
it saves syccessfully both for dbs and mesh..
but when i import the mesh in fluent , or open the dbs file in gambit again the mesh wil changed,,, i import the mesh file in gambit and i have the same problem ..i mean when i import them again the mesh the interior vol. and its mesh is vanished,,,also three middle edges of the wing geomrtry is vanished too..
what will be the problem..?


and some other questions, for a delta wing in supersonic regime, is this a good modelling procedure,,,?
is it possible to create structured grid around this delta wing? plz tell me the good dimensions of the interior and exterior domains in according to the wing geometry...also what size of mesh will be enough for wing face and two vloumes?

pictures::
http://nfsh.gigfa.com/figure1.jpg
http://nfsh.gigfa.com/1.jpg
http://nfsh.gigfa.com/2.jpg
http://nfsh.gigfa.com/3.jpg
http://nfsh.gigfa.com/4.jpg
morteza08 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Exporting structured mesh from ICEMCFD to Fluent? jeevan kumar FLUENT 1 January 23, 2012 12:21
[ICEM] Question about boundary type recognition when import mesh from IcemCFD to Fluent dean ANSYS Meshing & Geometry 2 April 23, 2010 11:17
mesh for fluent 12 hsn ANSYS Meshing & Geometry 4 September 17, 2009 15:54
help on import mesh file into Fluent hannah FLUENT 4 March 3, 2008 15:32
icem: import tecplot mesh David CFX 4 August 9, 2006 09:30


All times are GMT -4. The time now is 13:08.