CFD Online Logo CFD Online URL
Home > Forums > FLUENT

help for radiation with DO model

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   August 12, 2010, 21:35
Default help for radiation with DO model
New Member
Join Date: Oct 2009
Posts: 9
Rep Power: 10
qshuang is on a distinguished road
hello,guys! i am modeling the light radiation with DO model, but there is a problem that confused me. the collimated beam (Perpendicular to the glass wall) radiated from the glass wall to an annular reactor with water, after the simulation, it get a shocking result that the light transmitted aslant (please see the contour of incident radiation and pay attention to the right, all boundaries in the reactor are walls.the boundaries in the top, left and right are same in this case and to be opaque with the internal emissivity equals 1)! The light dirrection is set to be vertical and the direction should be unchanged in theory, i don't know why this happen (the light source is regard as purely specular)! please help me! any help is appreciated, thanks!
Attached Images
File Type: jpg help.JPG (21.3 KB, 13 views)
qshuang is offline   Reply With Quote

Old   July 8, 2016, 15:46
New Member
Join Date: Oct 2015
Posts: 13
Rep Power: 4
parmeshwar is on a distinguished road
have you solved your problem. I am working on same model and facing same problem......please give me your Email ID
parmeshwar is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
question about turbulence model selection and sensitivity karananand Main CFD Forum 1 February 26, 2010 05:41
Centrifugal Pump and Turbulence Model Michiel CFX 12 January 25, 2010 04:20
Problems bout CFD model of biomass gasification, Downdraft gasifier wanglong FLUENT 2 November 26, 2009 00:27
Reynolds Stress model in CFX vs Fluent Tim CFX 1 October 7, 2009 06:19
Grid resolution for full-scale and down scaled model gravis Main CFD Forum 0 October 2, 2009 10:27

All times are GMT -4. The time now is 21:23.