CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

how to plot attack angle along with impeller span direction at leading edge

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 31, 2010, 15:47
Default how to plot attack angle along with impeller span direction at leading edge
  #1
New Member
 
wild
Join Date: Dec 2009
Posts: 11
Rep Power: 16
wildli is on a distinguished road
hello, folks,
I got stuck on how to plot attack angle at impeller's leading edge along span direction through FLUENT. can anybody here give me a hint?
thanks a lot

or if I simplify this question, given that I know inlet angle distribution, how can I plot inlet relative flow angles? in this case once I can figure out what's the relative flow angle, I will be able to know attack angle.
wildli is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Netgen] Import netgen mesh to OpenFOAM hsieh OpenFOAM Meshing & Mesh Conversion 32 September 13, 2011 06:50
How to creat the impeller leading edge Jasmine ANSYS Meshing & Geometry 0 June 13, 2009 03:54
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55
angle of attack kiran FLUENT 0 September 10, 2004 09:18
Plot drag coeff,lift coeff VS angle of attack John FLUENT 2 August 29, 2003 14:06


All times are GMT -4. The time now is 11:56.