Examine Mesh Quality
 

Hello

In Gambit "examine mesh" form, the worst element of my model has an aspect ratio of 67 and the equiangle and equiside skew value of 0.84. (Below 0.85 equiangle value is considered ok).

But in my case equiangle skewness is ok but Aspect ratio is 67 which is supposed to be under 10 (if I am right). Do we have to check all the "quality types" for the good mesh quality or 1 of them is ok?

Please elaborate on this problem. I will be grateful.
Mohsin

Hi, I have a similar problem, i have a good quality for equiangle skew (0,14), but i have aspect ratio =50000 for the worst element in a turbolent case. Is it possible??