oh,my God!!!!!!
 

hi
when i interpreted the udf :o, i get the below message:o, the error part that i make it bold !!! i dont know if this is an important error, but why in the outlet i can use this boundary udf!!!!!!!! or why fluent allow me to start the iteratation with no problem!!!!!!!!!!!!!!!!!! :( :confused:
but after solution, i get so low efficiency!!!!!!! I really need!!!! plz help me!!





cells..
cpp -I"C:\Fluent6.3.26.Inc\fluent6.3.26/src" -I"C:\Fluent6.3.26.Inc\fluent6.3.26/cortex/src" -I"C:\Fluent6.3.26.Inc\fluent6.3.26/client/src" -I"C:\Fluent6.3.26.Inc\fluent6.3.26/multiport/src" -I. -DUDFCONFIG_H="<udfconfig-host.h>" "D:\saha2\coupled\89.8
11\kaplan-sepBlade.inlet\coarse-meshed\udf-g\design\89-22.5\pen\pressure.outlet.cpp"

error: udf compiler: cannot execute cpp -I"C:\Fluent6.3.26.Inc\fluent6.3.26/src" -I"C:\Fluent6.3.26.Inc\fluent6.3.26/cortex/src" -I"C:\Fluent6.3.26.Inc\fluent6.3.26/client/src" -I"C:\Fluent6.3.26.Inc\fluent6.3.26/multiport/src" -I. -DUDFCONFIG_H="<udfco
fig-host.h>" "D:\saha2\coupled\89.8.11\kaplan-sepBlade.inlet\coarse-meshed\udf-g\design\89-22.5\pen\pressure.outlet.cpp"

cpp -I"C:\Fluent6.3.26.Inc\fluent6.3.26/src" -I"C:\Fluent6.3.26.Inc\fluent6.3.26/cortex/src" -I"C:\Fluent6.3.26.Inc\fluent6.3.26/client/src" -I"C:\Fluent6.3.26.Inc\fluent6.3.26/multiport/src" -I. -DUDFCONFIG_H="<C:/Users/YAS/AppData/Local/Temp/udfconfig
node0.h>" "C:/Users/YAS/AppData/Local/Temp/pressure.outlet.cpp.0.c"

cpp -I"C:\Fluent6.3.26.Inc\fluent6.3.26/src" -I"C:\Fluent6.3.26.Inc\fluent6.3.26/cortex/src" -I"C:\Fluent6.3.26.Inc\fluent6.3.26/client/src" -I"C:\Fluent6.3.26.Inc\fluent6.3.26/multiport/src" -I. -DUDFCONFIG_H="<C:/Users/YAS/AppData/Local/Temp/udfconfig
node1.h>" "C:/Users/YAS/AppData/Local/Temp/pressure.outlet.cpp.1.c"

cpp -I"C:\Fluent6.3.26.Inc\fluent6.3.26/src" -I"C:\Fluent6.3.26.Inc\fluent6.3.26/cortex/src" -I"C:\Fluent6.3.26.Inc\fluent6.3.26/client/src" -I"C:\Fluent6.3.26.Inc\fluent6.3.26/multiport/src" -I. -DUDFCONFIG_H="<C:/Users/YAS/AppData/Local/Temp/udfconfig
node2.h>" "C:/Users/YAS/AppData/Local/Temp/pressure.outlet.cpp.2.c"

cpp -I"C:\Fluent6.3.26.Inc\fluent6.3.26/src" -I"C:\Fluent6.3.26.Inc\fluent6.3.26/cortex/src" -I"C:\Fluent6.3.26.Inc\fluent6.3.26/client/src" -I"C:\Fluent6.3.26.Inc\fluent6.3.26/multiport/src" -I. -DUDFCONFIG_H="<C:/Users/YAS/AppData/Local/Temp/udfconfig
node3.h>" "C:/Users/YAS/AppData/Local/Temp/pressure.outlet.cpp.3.c"

cpp -I"C:\Fluent6.3.26.Inc\fluent6.3.26/src" -I"C:\Fluent6.3.26.Inc\fluent6.3.26/cortex/src" -I"C:\Fluent6.3.26.Inc\fluent6.3.26/client/src" -I"C:\Fluent6.3.26.Inc\fluent6.3.26/multiport/src" -I. -DUDFCONFIG_H="<C:/Users/YAS/AppData/Local/Temp/udfconfig
node4.h>" "C:/Users/YAS/AppData/Local/Temp/pressure.outlet.cpp.4.c"

cpp -I"C:\Fluent6.3.26.Inc\fluent6.3.26/src" -I"C:\Fluent6.3.26.Inc\fluent6.3.26/cortex/src" -I"C:\Fluent6.3.26.Inc\fluent6.3.26/client/src" -I"C:\Fluent6.3.26.Inc\fluent6.3.26/multiport/src" -I. -DUDFCONFIG_H="<C:/Users/YAS/AppData/Local/Temp/udfconfig
node5.h>" "C:/Users/YAS/AppData/Local/Temp/pressure.outlet.cpp.5.c"