CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Port flow modelling in FLUENT

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 14, 2011, 11:17
Default Port flow modelling in FLUENT
  #1
New Member
 
Tom
Join Date: Jan 2011
Location: Uxbridge
Posts: 1
Rep Power: 0
zeppelin101 is on a distinguished road
Hi everybody!

I'm studying Mechanical Engineering and I'm in my final year writing my dissertation on the design and analysis of a single cylinder optical engine engine cylinder head.

I haven't been using FLUENT/Gambit very long and I've hit a bit of a speed bump with regard to modelling the problem in FLUENT.

The engine is running at full load so the pressure at the inlet port is 1bar, and I have some pressure data from a very similar engine. What I can't seem to achieve having played around with the various boundary conditions in the software is the right behaviour in the cylinder based on the pressure difference between the inlet port and the cylinder pressure.

So far, I've got the inlet port set up as a "pressure inlet", but I'm having some difficulty defining the cylinder as an entity with a specific pressure. With the types I've used so far, I either can't input pressure data into FLUENT, or the flow leaves the cylinder through the piston!

I've probably missed something quite obvious so far, but I'm very much a novice with the software so please bear with me...

Thanks for reading my spiel!

Tom
zeppelin101 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ferrofluid flow modelling in fluent Souviktor FLUENT 1 January 10, 2016 05:21
Advice on multi-phase flow modelling Martin Main CFD Forum 3 October 14, 2008 06:16
modelling blood flow in arteries with starcd sara Siemens 5 April 10, 2007 10:17
modelling supercavitating flow in Fluent mp_mathew FLUENT 1 July 10, 2005 12:26
How Fluent treat the pressure term in imcompressible flow Ray FLUENT 1 May 24, 2000 17:50


All times are GMT -4. The time now is 06:59.