My project is not converged?

CFD_LES · January 20, 2011, 02:56

Hello guys
I am an amateur in Fluent software & I need your help!!
I'm working on a CFD project by Fluent.It's very basic and simple but it's not converged
That is a dry cooling tower and it's surrounding that I built them by Gambit.In that we have wind in x direct.I iterated it by a very big number but it,s not converged.also I changed solution initialization but it wasn't effective.
Please help me what I have to do!!!!
Thanks a lot

Nikolopoulos · January 21, 2011, 12:08

Are you running LES?

Steady or unsteady?
I assume that the model doesn't diverge.
Which equation doesn't converge?

CFD_LES · January 22, 2011, 09:49

Thanks for your attention
As I said, I'm an amateur and I didn't understand What you mean by LES!! Large Eddy Simulation??
I used segregated solver and steady!
No one doesn't converge.
What's your opinion about Coupled implicit and Unsteady??while speed of wind isn't more than 10 m/s.
Is it better to use unsteady for this?????
Thanks a lot

Nikolopoulos · January 22, 2011, 11:07

What is your grid resolution?

You should also check usteady

January 20, 2011, 02:56	My project is not converged?	#1
CFD_LES New Member Reza Join Date: Sep 2010 Posts: 9 Rep Power: 15	Hello guys I am an amateur in Fluent software & I need your help!! I'm working on a CFD project by Fluent.It's very basic and simple but it's not converged That is a dry cooling tower and it's surrounding that I built them by Gambit.In that we have wind in x direct.I iterated it by a very big number but it,s not converged.also I changed solution initialization but it wasn't effective. Please help me what I have to do!!!! Thanks a lot

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Workbench project Corrupted, re-import data?	daschmidty	ANSYS	1	September 15, 2014 18:47
The FOAM Documentation Project - SHUT-DOWN	holger_marschall	OpenFOAM	242	March 7, 2013 12:30
Extend Project Release 1.6-ext	hjasak	OpenFOAM Announcements from Other Sources	33	July 14, 2011 18:54
The OpenFOAM extensions project	mbeaudoin	OpenFOAM	16	October 9, 2007 09:33
CFD project idea	John Cleveland	Main CFD Forum	4	March 8, 2005 12:55

January 21, 2011, 12:08		#2
Nikolopoulos Member Nikolopoulos Aristeidis Join Date: Jan 2011 Location: Athens, Greece Posts: 62 Rep Power: 15	Are you running LES? Steady or unsteady? I assume that the model doesn't diverge. Which equation doesn't converge?

January 22, 2011, 09:49		#3
CFD_LES New Member Reza Join Date: Sep 2010 Posts: 9 Rep Power: 15	Thanks for your attention As I said, I'm an amateur and I didn't understand What you mean by LES!! Large Eddy Simulation?? I used segregated solver and steady! No one doesn't converge. What's your opinion about Coupled implicit and Unsteady??while speed of wind isn't more than 10 m/s. Is it better to use unsteady for this????? Thanks a lot

January 22, 2011, 11:07		#4
Nikolopoulos Member Nikolopoulos Aristeidis Join Date: Jan 2011 Location: Athens, Greece Posts: 62 Rep Power: 15	What is your grid resolution? You should also check usteady