CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

How to give different flow velocity to air and methane at the same inlet??

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 7, 2011, 11:36
Default How to give different flow velocity to air and methane at the same inlet??
  #1
New Member
 
ravi teja
Join Date: May 2010
Posts: 7
Rep Power: 15
dharanishb is on a distinguished road
Hi
I am trying to simulate combustion in a multiple slot burner used in an idealized household boiler
Inlet velocities of fuel slot of methane and primary air are given as 1.013m3/hr and 11.57m3/hr respectively.
I am at a loss as to how to give 2 inlet velocities at the same boundary condn(mass_flow_inlet).
Plz Help~~
dharanishb is offline   Reply With Quote

Old   February 7, 2011, 20:13
Default
  #2
Senior Member
 
Real Name :)
Join Date: Jan 2010
Location: United States
Posts: 192
Rep Power: 16
ComputerGuy is on a distinguished road
It looks like you're trying to specify the inlet based upon volume fractions. If that's the case, what you want to do is change volume fractions to a mass fraction, specify the inlet velocity such that it gives you the appropriate in situ volumetric flow rate, then voila!

If you're unsure how to do this, let us know. Those two gases behave pretty ideally, so this isn't a tough problem to set up by mass.

ComputerGuy
ComputerGuy is offline   Reply With Quote

Old   February 16, 2011, 09:50
Default
  #3
New Member
 
ravi teja
Join Date: May 2010
Posts: 7
Rep Power: 15
dharanishb is on a distinguished road
Quote:
Originally Posted by ComputerGuy View Post
It looks like you're trying to specify the inlet based upon volume fractions. If that's the case, what you want to do is change volume fractions to a mass fraction, specify the inlet velocity such that it gives you the appropriate in situ volumetric flow rate, then voila!

If you're unsure how to do this, let us know. Those two gases behave pretty ideally, so this isn't a tough problem to set up by mass.

ComputerGuy
Thank you very much for taking time out to reply Computer Guy.
The case that i am trying to run is from an article called "Sensitivity of temperature and concentration measurements in hot gases from FTIR emission spectroscopy"
In the article the flow rates of methane, primary air( methane +air), and secondary air are given as 1.013m3/hr, 11.57m3/hr and 1.93m3/hr respectively
I took your advice and found out the mass fractions and specified the corresponding inlet velocity for primary air(7.67m/sec) and secondary air(0.178m/sec) by dividing the volumetric flow rate by the area of cross section.
I am running the simulation in 2D
Unfortunately with the above inlet velocities i am getting an absurd result.
I am at a loss in understanding where i am going wrong.Please help me.

Last edited by dharanishb; February 17, 2011 at 07:41.
dharanishb is offline   Reply With Quote

Old   June 13, 2011, 15:52
Default
  #4
New Member
 
Ahmed khamis
Join Date: Jun 2011
Posts: 4
Rep Power: 14
a_elgazar2007 is on a distinguished road
now i am trying simulate the same burner but i am failed

i need help

meca_zag@yahoo.com
a_elgazar2007 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mixing AIR and METHANE zalho FLUENT 5 February 14, 2013 22:52
modelling of flow between methane and air satya FLUENT 5 April 3, 2009 07:32
Lean swirled premixed combustion methane air bisounours FLUENT 0 July 4, 2007 07:52
kinetic data for methane air global reaction James FLUENT 0 March 11, 2006 16:33
Combustion Convergence problems Art Stretton Phoenics 5 April 2, 2002 06:59


All times are GMT -4. The time now is 07:58.